Please subscribe to the TileBit.com newsletter
 For additional diamond
drilling and sawing tools and equipment,
Barrett Diamond Products,
Inc. |
Barrett Diamond Products, Inc.
has developed the "TileBit-Pro", patent pending, a unique
professional diamond bit for drilling all types of ceramic tile including the
hardest porcelain tiles. |
 |
"TileBit-Pro"
The Professional Diamond bit for drilling all types of Ceramic
Tile
|
With the ever increasing
popularity of tile, particularly high quality porcelain tiles, a new method of
drilling access and mounting holes was needed. A new "faster-easier-cheaper"
method of drilling holes is now available using Barrett Diamond Products, Inc.
"TileBits". For a further explanation of why you need a set of
"TileBits" in your tool box, check out Drilling holes
in tile.
Unique Design: Incorporating a built-in
method of injecting coolant to the face of the bit enabling a high rotational
speed resulting in exceptionally high penetration rates in all nonmetallic,
hard vitreous materials. |
- Fast
- Inexpensive
- Reliable
- Drills all types of tile. (Drills tile where
carbide tipped bits, both rotary "spear point" and "hammer drill" bits
fail.)
- Drills without chipping, cracking or
breaking.
- Operates without noise, vibration or dust.
- Easy to use.
- Very long life. Life can exceed 200 holes
- Available in a wide range of sizes. Sizes from
1/4 inch through 3 inch diameter.
- Versatile. Can be used with any 3/8 inch
variable high-speed hand drill or drill press.
|
 |
Drilling a hole in the hardest
porcelain tiles in as little as 10 seconds with less than two teaspoons of
water and without dust, noise or chipping. |
"TileBit-Pro" & Drilling Kit
Prices

"TILEBIT" DRILLING KIT
A complete DRILLING KIT for "TileBit-Pro" is available
to simplify drilling tile.
|
|
The kit includes:
- A "TILEBIT" piloting fixture which centers the bit
when starting holes and prevents bit "Spin-Out" or "Skating"
- The drilling guide has a rubber nonskid backing, to
help prevent "walking" on a wet surface.
- A ½ gallon pressure pump-up can that contains
enough water (under pressure) to drill many holes.
- Two valves, one mounted on the handle for convenient
ON-OFF while drilling and a second for metering, allowing for precise flow
control.. The ease of operation makes it possible to keep the amount of water
used to a minimum.
|
"TileBit-Pro" & Drilling Kit
Prices
Copyright 2002~2007 Barrett Diamond Products
|