 |
 |
 |
 |
| Last Update May 2, 2010 |
Please subscribe to the TileBit.com newsletter
Statement of Conformity
| Barrett Diamond Products "TileBits" are manufactured to
conform with the American National Standards Institute Standards B212.15 as listed in the following table. Most anchors are designed to be installed in holes that meet this specification. |
| Normal Bit OutsideDiameter Inches |
ANSI Standards Inches |
Normal Bit OutsideDiameter Inches |
ANSI Standards Inches |
|---|---|---|---|
| 1/8" | 0.134" - 0.140" | 11/16" | 0.713" - 0.723" |
| 5/32" | 0.165" - 0.171" | 3/4" | 0.775" - 0.787" |
| 11/64" | 0.181" - 0.187" | 27/32" | 0.865" - 0.881" |
| 3/16" | 0.198" - 0.206" | 7/8" | 0.905" - 0.917" |
| 7/32" | 0.229" - 0.237" | 15/16" | 0.968" - 0.980" |
| 1/4" | 0.260" - 0.268" | 1" | 1.030" - 1.042" |
| 9/32" | 0.296" - 0.304" | 1-1/8" | 1.160" - 1.175" |
| 5/16" | 0.327" - 0.335" | 1-1/4" | 1.285" - 1.300" |
| 3/8" | 0.390" - 0.398" | 1-3/8" | 1.410" - 1.425" |
| 7/16" | 0.458" - 0.468" | 1-1/2" | 1.535" - 1.550" |
| 1/2" | 0.520" - 0.530" | 1-5/8" | 1.655" - 1.675" |
| 9/16" | 0.582" - 0.592" | 1-3/4" | 1.772" - 1.792" |
| 5/8" | 0.650" - 0.660" | 2" | 2.008" - 2.028" |
| All impregnated diamond core bit are slowly consumed in the drilling process. A "TileBit" is considered worn-out when it on longer meets the specifications listed in the table above. |
